Loading

Girls Frontline - M1918 - B-style - 1/4 - Bunny Ver. (FREEing)Girls Frontline - M1918 - B-style - 1/4 - Bunny Ver. (FREEing)¥ Koop¥ Koop

Girls Frontline - M1918 - B-style - 1/4 - Bunny Ver. (FREEing)
Categorie
Classificatie(s)
Herkomst(en)
Personage(s)
Materialen
Schaal & Afmetingen
1/4  H=465mm (18.14in, 1:1=1.86m)
Release date
04/27/2020 As Standard
Prijs
Japans15,811 hits • 44 berichten27 favorieten

Koop

Berichten44

In stock @ Solaris Japan (¥26,232)

Brand New for ¥26,232
└ Packed with recycled materials ♻
Pre Owned for ¥23,575
└ Check product page for item condition.
In stock @ Nin-Nin-Game (¥22,550)
Brand New! => Girls' Frontline - M1918 Bunny Ver. [B-Style / FREEing]
-18% OFF / ~186.13 € / ~$218.89
└ +5% Points on all Orders!
└ Worldwide Express Shipping! ✈
take123 Bunny Farm
Mine looks like the photos below, it slants a bit forward. But then I think about it and its probably her pose, she's leaning a little forward.
22 dag(en) geleden
lam101aa25 dag(en) geleden#80216195Mine one.
Yellow line is a perpendicular line, red line connects her nose to her heel toe.
I've investigated few pictures of the official display sample given by gsc, red line should be almost parallel to yellow line normally, but obviously, the manufacturer encountered some difficulties in the manufacturing processes as this issue is quite common (I've seen the same issue frequently reported by the others), they even didn't check or make a test on each completed goods.
http://i.imgur.com/bOsZWan.jpg
http://i.imgur.com/XsLZ9Yo.jpg


Yup that looks like mine. I can live with it but its annoying
25 dag(en) geleden
Hazzy126 dag(en) geleden#80215501Glad its not just me. Spent a good 20min struggling to get it right but still have the lean. I think thats just how she is. Some of these freeing bases are so painful.
https://static.myfigurecollection.net/upload/pictures/2020/07/10/2472531.jpeg
https://static.myfigurecollection.net/upload/pictures/2020/07/10/2472530.jpeg

Mine one.

Yellow line is a perpendicular line, red line connects her nose to her heel toe.

I've investigated few pictures of the official display sample given by gsc, red line should be almost parallel to yellow line normally, but obviously, the manufacturer encountered some difficulties in the manufacturing processes as this issue is quite common (I've seen the same issue frequently reported by the others), they even didn't check or make a test on each completed goods.

https://i.imgur.com/bOsZWan.jpg
https://i.imgur.com/XsLZ9Yo.jpg
25 dag(en) geleden
lam101aa1 maand(en) geleden#79837186Mine one both foot can be plugged in perfectly, but her legs and whole body also bend forward little bit. I sent email to GSC for asking that issue, they said they couldn't send the replace part based on the figure I got.

Glad its not just me. Spent a good 20min struggling to get it right but still have the lean. I think thats just how she is. Some of these freeing bases are so painful.

https://static.myfigurecollection.net/upload/pictures/2020/07/10/2472531.jpeg

https://static.myfigurecollection.net/upload/pictures/2020/07/10/2472530.jpeg
26 dag(en) geleden
MayuriShiina1 maand(en) geleden#79616236I have the same problem. Might be a common issue. Mine is also leaning forward though, that is very worrying.
Mine one both foot can be plugged in perfectly, but her legs and whole body also bend forward little bit. I sent email to GSC for asking that issue, they said they couldn't send the replace part based on the figure I got.
1 maand(en) geleden
MayuriShiina1 maand(en) geleden#79616236I have the same problem. Might be a common issue. Mine is also leaning forward though, that is very worrying.
Mine one both foot can be plugged in perfectly, but her legs and whole body also bend forward little bit. I sent email to GSC for asking that issue, they said they couldn't send the replace part based on the figure I got.
1 maand(en) geleden
take1231 maand(en) geleden#79616160 Does anyone have issue getting the front foot to mount flat onto the circular base? I can get her to get her heal in the hole but her toe tip area is hard to mount flat.
I have the same problem. Might be a common issue. Mine is also leaning forward though, that is very worrying.
1 maand(en) geleden
take123 Bunny Farm
So I got mine today after all those Coronavirus shipping delays. Does anyone have issue getting the front foot to mount flat onto the circular base? I can get her to get her heal in the hole but her toe tip area is hard to mount flat.

She is quite heavy compared to the other Freeing figures, with the gun and bunny doll, need to be careful with mounting her straight.

She's tall but not quite tall as other 1/4 standing bunnies I've seen. Relatively normal 1/4 scale compared to other bunnies.

https://static.myfigurecollection.net/upload/pictures/2020/06/27/2462676.jpeg
1 maand(en) geleden
Your source for old and rare figurines!

Afbeeldingen42

Gerelateerde items

Gemeenschap

In bezit van
Besteld door
Gewenst door
Listed in
Gemiddelde waardering
9.43/10 7 keer gewaardeerd

Gerelateerde clubs3

Geschiedenis 7

Toegevoegd door
Kaneel 2 jaar geleden
Laatst gewijzigd door
Kaneel 3 maand(en) geleden